Make your Clogger pants your own with these customization options. Available for Zero, Ascend, DefenderPRO and Spider pants.
1. BRANDING OPTIONS
All branding or fabric change projects incur a 25% custom garment fee. Additional costs related to the creation and addition of logos are listed below.
We have green and orange fabric available for accent flashes. All accent flashes must be changed.
The abrasion resistant fabric present on the back leg (dark grey fabric) and the ultra-high tear strength (light grey) on the Zeros can swapped over in the case of end user functionality (e.g. left-handed chainsaw operation).
These changes are included in the 25% custom garment fee.
LOGO SIZE AND PLACEMENT
The maximum possible size is 10 x 10 cm (100 cm2). These dimensions are dependent on the placement of the logo on the garment as panel size will dictate the final logo size.
Adding an embroidered logo incurs the 25% customer garment fee as well as the fees below. In additional to the per logo charge, there is a one-time set-up fee per logo of $30.
|Logo Size||Qty x 1||Qty x 3||Qty x 6|
|5 x 5 cm (25 cm2)||$25||$16||$8|
|5 x 10 cm (50 cm2)||$28||$18||$9|
|5 x 15 cm (75 cm2)||$36||$22||$12|
|10 x 10 cm (100 cm2)||$45||$29||$16|
- The sizes above are guides, in order to determine the correct price then round to the closest logo size listed below.
- If order is for more than 6 then multiply by the 6 unit rate.
- The larger the embroidery size there is the potential to shrink the fabric slightly and cause a patch of non-stretch fabric.
c. HEAT PRESS
LOGO SIZE AND PLACEMENT
Maximum possible size is 10 x 15 cm (150 cm2). These dimensions are dependent on the placement of the logo on the garment as panel size will dictate the final logo size. Generally, we can go bigger on a heat transfer logo than embroidery.
Adding an embroidered logo incurs the 15% customer garment fee as well as the fees below. In addition to the per logo charge, there is $40 set up fee each time the logos are printed.
|Logo size||Qty x 10||Qty x 30||Qty x 50|
|Heat Transfer Print||$18||$13||$9|
- The heat transfers are printed by a third party and these are charged to the customer. The customer owns the heat transfers and Clogger stores them on the customer's behalf.
We do not alter/move or remove current Zero or Clogger Embroidery.
Custom embroidery of a logo or text (maximum size is 10 x 10 cm or 100 cm2) can be applied on the front right thigh above the seamline.
b. HEAT TRANSFER
A heat applied transfer logo (maximum size 10 x 15 cm (or 150 cm2) can be applied on the right thigh above the seamline or on the mid-section of the back legs.
Disclaimer: Images are a guideline only and are not 100% accurate or to scale.
Want to make your Clogger pants your own?
Just choose the Custom Garment option on the model of pants that you like and we will be in touch.